300mm Extended S-Cab Landcruiser - #CNUL8R

Wol Cruiser.JPG

Jenny and David had big plans for their ute - It has been a long time coming but it was worth the wait! They had started looking into vehicles, trays and accessories mid-2019, gathered quotes in 2020 and throughout 2021 all the hard work began to pay off as it started to come together.  


They had the vehicle delivered to TJM Hunter Valley (Our Newcastle Fitting Agent) for makeover #1 including some major modifications such as the GVM Upgrade, 300mm Chassis Extension and 2” Lift. The vehicle was then transported to our Bronco Factory in Bathurst for the tray and canopy fitment.  


Fitment began shortly after the vehicle was received and was completed within the day. Due to Covid-19, Jenny and David were unable to see the vehicle until after we had fit the canopy and tray. Once they received their vehicle back, they were incredibly impressed to see it all coming together!  


The transformation of this vehicle is far from over, Jenny commenting “anything that can be modified or upgraded on our vehicle has either been completed or is booked in to be done”. Once they complete the monstrous set-up their first trip will be across the Nullarbor to WA followed by a loop around Australia. They have upgraded the clutch to be able to tow 8 tonne and will use this towing capacity to tow an Aussie Swag Camper - They will be able to set-up home anywhere they go and be sure that their custom Drawer System for the canopy has a special spot for their most loved accessory – A Coffee Machine! 


We can’t wait to see what the rig looks like in the future when they have completed their set-up! Images, Videos and Information on this set-up are found below: 

wol cru.JPG


  • 2021 Toyota LandCruiser 79 Series with a 300mm Chassis Extension 

  • Silver Pearl 1F7 vehicle colour  


Current Vehicle Specs: 

  • Jmax GVM Upgrade 

  • Jmax Super Chassis 300mm Extension  

  • 2” Lift 

  • ATD Custom Bull Bar and Side Steps with built in Indicator lights and Custom Number Plate Cut-Out 

  • DBA Rotors Drilled and Slotted 

  • Brake Booster is no longer a vacuum anymore but is hydraulic running off the Powder Steering 

  • Car Builders Sound Deadening  

  • Air Bag Suspension 

  • 33” Rims and Mickey Thompson Tyres 

  • 2x Air Compressors  

  • TJM Ultima 215 LED Driving Spotlights  

  • Front + Rear Winch 

  • Department of The Interior Cruiser Consoles and Roof Console.  

  • ClearView Next Gen Power Mirrors  

  • Cel-Fi Go Signal Booster Antenna  

  • 3.5 Torqit Exhaust  


Future Vehicle Specs:  

  • Full Internal Canopy Kit-Out including Custom Draws and Fridges.  

  • The Bush Company 270 XT Max Awning  

  • PVS Automotive 21.1 Inch Multimedia Head Unit  

  • Vinyl Floor and Leather Seats  

wol cru 2.JPG

Tray Spec: 

  • V4/V5 Extended Alloy Base Tray:  

  • 2700mm (L) 1900mm (W) 

  • 4mm Flat Floor with Multiple Internal Tie Down Points 

  • 3-Inch Pipe Headboard. Heavy Duty 4.5mm Thick Alloy Tubing  

  • Integrated Headboard Fuel Filler with Flush Locking Cap engraved “DIESEL”  

  • Powder Coated Matte Black with 2-Pack Painted Toolbox Doors. Colour matched Silver Pearl 1F7 

  • Bronco Window Mesh  

  • 36L Headboard Mounted Water Tank with Flush Locking Cap Engraved “WATER” and gravity fed outlet/tap fitted to rear of tray 

  • Partial Length Rope Rail with One Piece, Flared Mud Guards 

  • Integrated Tail Light Housing with MaxiLamp LED Tail Lights  

  • Full Length Sideboards and Tailgate with Aluminum Protective Capping, Heavy Duty Latches and Hinges  

  • Stainless Gudgeons bolted to Base Tray  

  • 1500 Deep Sealed Rear Draw, Sealed from Dust and Water  

  • 50L Water Tank. This is plumbed with the 36L Headboard Tank meaning only one outlet/tap is required  

  • Special V4 Flat Bottom Toolboxes fitted In Front of Wheel with colour matched Toolbox Doors  

  • V5 Integrated Toolboxes fitted Behind of Wheel with colour matched Toolbox Doors 

  • Stylishly Integrated into the shape of the Tail Light Housing at Rear of Tray  

  • Black and Chrome Whale Tail Latches fitted to all Toolboxes and Rear Draw 

  • Headboard Mounted Spare Tyre Carrier 

  • Black Bronco Built Mud Flaps 



Canopy Spec: 

  • 2400mm Canopy (Full Length): 

  • 2.5mm Flat Aluminum. 

  • Heavy Duty Internal Structure. 

  • 2x Louvre Vents (Replaceable Filters) Concealed against Headboard  

  • 2x Full Length Gull Wing Doors fitted with CentaFlex Hinge and are Colour matched to the vehicle 

  • Central Locking Latches fitted – Black and Chrome. 

  • Fold Down Ladder fitted to the back of Canopy – Mounted Centre 

  • Dual Spare Tyre Holders fitted to the back of Canopy – Mounted Passenger and Driver Side 

  • 2300mm (L) Builders Rack with Mesh Base (Full Aluminum Construction) 

  • Heavy Duty Lift Off Legs  

  • False Wall to suit Front of Canopy and Roof of Canopy (Full Aluminum Construction)